Also read; Power all your system apps using mtn bis and simple server on PC
Requirements
-Download Infinix hot 2 stock rom OR better still android 5.1 lollipop rom-Download SP flashtool
-Download VCOM port driver
STEPS
-extract all 3 software you downloaded-go to device manager > click action > click on add legacy software
-Under welcome to add new hardware, click next>>Click have disk>>Click on browse then navigate to your VCOM driver software, select the driver setup and click open
-Select mediatek preloader USB VCOM driver
- navigate to your SP flash tool folder
-Double click on the SP flash tool application file
-click on scatter loading and locate and click on the infinix hot 2 stock rom then select the " MT6580_Android_scatter.txt "
-then by your far upper left hand side, click on download now and change it to firmware upgrade
-after that, then switch off your device ( you must have above 60% battery juice left on your phone before attempting this) then connect your phone to your PC via USB cord.
-make sure you do not tamper with the usb cord at this point, you will notice a progress bar running below , then after like 5-10mins you should see a good mark sign just like the one in the caption below
-once the above displays, disconnect your phone from your PC and close the SP flash tool and reboot your device.
Congratulations!you have successfully downgraded your device to android 5.1 lollipop
The vcom driver didn't work on my windows 7 and 8. Any help on this! Thanks
ReplyDeletesorry for the inconvenience sir, this vcom driver works perfectly well on windows 7 but i cant say the same for windows 8, try re-downloading the vcom driver and try this;
DeleteUnder welcome to add new hardware, click next>>Click have disk>>Click on browse then navigate to your VCOM driver software, select the driver setup and click open